Industrial Solution - Railway
Industrial Solution - PoE
Industrial Solution - Wireless
Industrial Ethernet Switch
Industrial Media Converter
Industrial Device Server
Industrial Wireless Access Point
Industrial Cellular VPN Router
Management Software & Accessories
IAP-W510
Industrial outdoor IEEE 802.11 a/n wireless access point with 1x10/100Base-T(X), IP-67 grade
 

Overview

IAP-W510 is a reliable IP-67 outdoor IEEE 802.11 a/n WLAN Access Point with 1 waterproof Ethernet port. It can be configured to operate in AP/Bridge/Repeater/AP-Client/Client mode. In combination with its IP-67 design and the superb management functionality, IAP-W510 is specifically designed for the toughest industrial environments and provides a waterproof, dust-tight connection. In addition, IAP-W510 provides high power output of 500mw and high throughput up to 80Mbps to satisfy far distance connection. You are able to configure IAP-W510 by WEB interface via LAN port or WLAN interface. The IAP-W510 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, IAP-W510 is one of the best outdoor communication solutions for wireless applications

 

Features

•High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
•Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X     Authentication supported
•High throughput > 80Mbps
•High power output 500mw
•Supports X-Roaming < 100 ms
•Supports wireless load balance
•Supports AP/Bridge/Repeater/AP-Client/Client Mode
•Wireless connecting status monitoring
•HTTPs protocol supported for secured management
•Event Warning by Syslog, Email, SNMP Trap
•Wide-range Power Inputs :12~68VDC
•Rigid IP-67 housing design
•Pole and Wall-mount enabled

Specifications
ORing WLAN Access Point Model

IAP-W510

Physical Ports  
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
WLAN interface  

Operating Mode

AP/Bridge/Repeater/AP-Client/Client

Antenna Connector

Built-in 15dBi panel antenna

Radio Frequency Type

OFDM

Modulation

IEEE802.11a : OFDM with BPSK, QPSK, QAM, 64QAM
IEEE802.11n : BPSK, QPSK, 16-QAM, 64-QAM

Frequency Band

America / FCC :  5.15 to 5.825 GHz (13 channels)
Europe CE / ETSI : 5.15 to 5.724 GHz (19 channels)

Transmission Rate

IEEE802.11a: 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
IEEE801.11n: 300Mbps

Transmit Power

IEEE802.11a/n: 500mw

Receiver Sensitivity

-82dBm @ 54Mbps, PER< 10%;
-78dBm@MCS 15(11n, 20MHz), PER< 10%;
-75dBm@MCS 15(11n, 40MHz), PER< 10%

Encryption Security

WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WPAPSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption

Wireless Security

SSID broadcast disable

Protocol Support  

Protocol

ARP,BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)

LED Indicators  

Power indicator

PWR / Ready: 1 x LED
Green On: Power is on and functioning Normally.

10/100Base-T(X) RJ45 port indicator

1 x LED,
Green On: Port Link
Green Blinking: Transmitting data

WLAN LED

1 x LED, Green for WLAN Link/ Act

Power  

Input power

48VDC on RJ45

Power consumption (Typ.)

9 Watts

Physical Characteristic  
Enclosure IP-67
Dimension (W x D x H) 162(W)x 102(D)x 58(H) mm (6.38x 4.02x 2.28 inch.)
Weight (g) 680 g
Environmental  
Storage Temperature -30 to 85°C (-22 to 185°F)
Operating Temperature -20 to 70°C (-4 to 158°F)
Operating Humidity 100% Non-condensing
Regulatory approvals  
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

Available Model
Model No. Description
IAP-W510_US Inustrial outdoor IEEE 802.11 a/n wireless access point with 1x10/100Base-T(X), IP-67 grade, US band
IAP-W510_EU Industrial outdoor IEEE 802.11 a/n wireless access point with 1x10/100Base-T(X), IP-67 grade, EU band