|
|
|
|
 |
Overview |
|
RGS-7244GP series are the managed redundant ring Ethernet switches with 24x10/100/1000Base-(TX) ports and 4x1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s Thunder Series Ethernet switches also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special Device Binding function can permit only allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It is hardware-based prevention so it can prevent DDOS attack immediately and completely. And all functions of RGS-7244GP can also be managed centralized and convenient by Open-Vision v3.0, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet application. |
|
Features |
|
•Support 24x10/100/1000Base-T(X) and 4x1000Base-X SFP ports |
| Specifications |
|
| ORing Switch Model | RGS-7244GP |
| Physical Ports | |
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 24 |
| 1000Base-X SFP Port | 4 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
| MAC Table | 8192 MAC addresses |
| Processing | Store-and-Forward |
| Priority Queues | 4 |
| Switch Properties | Switching latency: 7 μs Switching bandwidth: 56Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
| Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security |
| Jumbo frame | Up to 9K Bytes |
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
| Network Redundancy | O-Ring STP RSTP MSTP |
| RS-232 Serial Console Port | RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power Indicator | Green : power indicator |
| System Ready Indicator (STA) | Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware. |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode. |
| O-Ring Indicator (Ring) | Green : Indicates that the system is operating in O-Ring mode Blinking indicates that the Ring is broken. |
| Sysem Runnig Indicator (RUN) | Green : System is operating continuously |
| Supervisor Login Indicator (RMT) | Green : System is accessed remotely |
| Reset To Default Running Indicator (DEF) | Green : System reset to default configuration |
| Ping Command To The Switch Indicator (Ping) | Green : System is processing “PING” request |
| 10/100/1000Base-T(X) RJ45 port indicator | Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator. Right Amber for full-duplex indicator. |
| 1000Base-X SFP port indicator | Green for port Link/Act. |
| Power | |
|
Input power |
AC 100~240V/AC, 50-60Hz |
|
Power Consumption (Typ.) |
36 Watts |
|
Overload current protection |
Present |
| Power | |
|
Input power |
AC 100~240V/AC, 50-60Hz |
|
Power Consumption (Typ.) |
36 Watts |
|
Overload current protection |
Present |
| Physical Characteristic | |
|
Enclosure |
19-inch rack-mountable |
|
Dimension (W x D x H) |
279.4(W)x300(D)x44(H) mm (11 x 11.81 x 1.73 inch) |
|
Weight (g) |
2700 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 84,479 |
| Warranty | 5 years |
|
Available Model |
| Model No. | Description |
| RGS-7244GP_US | Industrial 28-port rack mount managed Gigabit Ethernet switch with 24x10/100/1000Base-T(X) and 4x1000Base-X, SFP socket, US power cord |
| RGS-7244GP_EU | Industrial 28-port rack mount managed Gigabit Ethernet switch with 24x10/100/1000Base-T(X) and 4x1000Base-X, SFP socket, EU power cord |
|
Accessories |
| Model No. | Description |
| Open-Vision M500 | Powerful Network Management Windows Utility Suite, 500 IP devices |
| SFP100 series | 100Mbps SFP optical transceiver |
| SFP1G series | 1Gbps SFP optical transceiver |
| DR-45 series | 45W DIN-Rail power supply series |
