|
|
|
|
 |
Overview |
|
RGS-7244GP series are the managed redundant ring Ethernet switches with 24x10/100/1000Base-(TX) ports and 4x1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s Thunder Series Ethernet switches also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special Device Binding function can permit only allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It is hardware-based prevention so it can prevent DDOS attack immediately and completely. And all functions of RGS-7244GP can also be managed centralized and convenient by Open-Vision v3.0, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet application. |
|
Features |
|
•Support 24x10/100/1000Base-T(X) and 4x1000Base-X SFP ports |
| Specifications |
||
| ORing Switch Model |
RGS-7244GP |
RGS-7244GP-E |
| Physical Ports | ||
| 10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 24 | |
| 1000Base-X SFP Port | 4 | |
| Technology | ||
| Ethernet Standards |
IEEE 802.3 for 10Base-T |
|
| MAC Table | 8K | |
| Priority Queues | 4 | |
| Processing | Store-and-Forward | |
| Switch Properties |
Switching latency: 7 μs |
|
| Jumbo frame |
Up to 9K Bytes |
|
| Security Features |
Device Binding security feature |
|
| Software Features |
STP/RSTP/MSTP (IEEE 802.1D/w/s) |
|
| Network Redundancy | O-Ring STP RSTP MSTP |
|
| RS-232 Serial Console Port |
RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1 |
|
| LED Indicators | ||
|
Power Indicator(PWR) |
Green : Power indicator for AC |
Green : Power indicator for AC and DC |
|
Power-1 Indicator (PW1) |
N/A |
Green : Indicates Power-1 input |
|
Power-2 Indicator (PW2) |
N/A |
Green : Indicates Power-2 input |
|
Power-3 Indicator (PW3) |
N/A |
Green : Indicates Power-3 input |
|
System Ready Indicator(STA) |
Green : Indicates that the system is ready. The LED is blinking when the system is upgrading firmware. |
|
|
R.M. Indicator(R.M.) |
Green : Indicates that the system is operating in O-Ring Master mode. |
|
|
O-Ring Indicator(Ring) |
Green : Indicates that the system is operating in O-Ring mode Blinking indicates that the Ring is broken. |
|
|
Fault Indicator (Fault) |
N/A |
Amber : Indicates unexpected event occurred |
|
Sysem Runnig Indicator (RUN) |
Green : System is operating continuously |
|
|
Supervisor login indicator (RMT) |
Green : System is accessed remotely |
|
|
Reset to Default running indicator (DEF) |
Green : System resets to default configuration |
|
|
Ping command to the switch indicator (Ping) |
Green : System is processing “PING” request |
|
|
10/100/1000Base-T(X) RJ45 port indicator |
Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator.Right Amber for full-duplex indicator. |
|
|
1000Base-X SFP Fiber port indicator |
Green for port Link/Act. |
|
|
Fault Contact |
||
|
Relay |
N/A |
Relay output to carry capacity of 1A at 24VDC |
| Power | ||
|
Redundant Input Power |
100~240VAC with power cord |
100~240VAC with power cord, dual 36 ~ 72VDC power inputs at 6-pin terminal block |
|
Power Consumption (Typ.) |
36 Watts |
36 Watts |
|
Overload Current Protection |
Present |
|
| Physical Characteristic | ||
| Enclosure |
19-inch rack-mountable |
|
| Dimension (W x D x H) |
443.7(W) x 200(D) x 44mm(H) mm |
431 (W) x 342 (D) x 44 (H) mm |
| Weight (g) |
2700 g |
4250g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -40 to 70°C (-40 to 158°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory approvals | ||
| EMI |
FCC Part 15, CISPR (EN55022) class A |
|
| EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
|
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
|
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) |
84,479 |
|
| Warranty | 5 years | |
|
Available Model |
| Model No. | Description |
| RGS-7244GP-E_US | Industrial 28-port rack mount managed Gigabit Ethernet switch with 24x10/100/1000Base-T(X) and 4x1000Base-X, SFP socket, enhanced version, US power cord |
| RGS-7244GP-E_EU | Industrial 28-port rack mount managed Gigabit Ethernet switch with 24x10/100/1000Base-T(X) and 4x1000Base-X, SFP socket, enhanced version, EU power cord |
|
Accessories |
| Model No. | Description |
| DR-75 series | 75W DIN-Rail power supply series |
| DR-120 series | 120W DIN-Rail power supply series |
| SFP1G series | 1Gbps SFP optical transceiver |
| Open-Vision M500 | Powerful Network Management Windows Utility Suite, 500 IP devices |
