|
|
|
|
 |
Overview |
|
RGPS-7084GP-P is managed redundant ring PoE Ethernet switches with 8x10/100/1000Base-T(X) P.S.E. ports and 4x1000Base-X SFP ports. RGPS-7084GP-P provided advanced IP-based bandwidth management which can limit each IP device maximum bandwidth. User can configure IP camera and NVR with more bandwidth and limit the bandwidth of other device. RGPS-7084GP-P also supports application-based QoS which can set highest priority for data stream according TCP/UDP port number. RGPS-7084GP-P also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, RGPS-7084GP-P will lock the source IP address for certain time to prevent the attack. It’s hardware-based prevention so it can prevent plenty of DOS/DDOS attacks immediately and completely. RGPS-7084GP-P also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each RGPS-7084GP-P switch has 8x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE connection. All function of RGPS-7084GP-P can be managed centralized and Web-based, Telnet, Console (CLI). Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet and PoE application. |
|
Features |
|
•Supports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy |
| Specifications |
|
| ORing Switch Model | RGPS-7084GP-P |
| Physical Ports | |
| 10/100/1000Base-T(X) Ports in RJ45 With P.S.E. | 8 (120Watts with maximum 30Watts per port) |
| 1000Base-X SFP Port | 4 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.) |
| MAC Table | 8192 MAC addresses |
| Processing | Store-and-Forward |
| Priority Queues | 4 |
| Switch Properties | Switching latency: 7 us Switching bandwidth: 20Gbps Max. Number of Available VLANs: 256 IGMP multicast groups: 128 for each VLAN Port rate limiting: User Define |
| Security Features | Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security |
| Jumbo frame | Up to 9K Bytes |
| Software Features | STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DoS/DDoS auto prevention Port configuration, status, statistics, monitoring, security DHCP Client/Server |
| Network Redundancy | O-Ring STP / RSTP MSTP |
| RS-232 Serial Console Port | RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power Indicator | Green : power indicator |
| System Ready Indicator (STA) | Green : Indicate system ready. Blinking for system is upgrading firmware. |
| Ring Master Indicator (R.M.) | Green : Indicate system operated in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green : Indicate system operated in O-Ring mode Blinking to indicate Ring is broken. |
| Sysem Runnig Indicator (RUN) | Green : System operated continuously |
| Reset To Default Running Indicator (DEF) | Green : System reset to default configuration |
| PoE indicator | Blue : PoE LED x 8 |
| 10/100/1000Base-T(X) RJ45 port indicator | Green for port Link/Act. Amber for Duplex/Collision |
| 1000Base-X SFP port indicator | Green for port Link/Act. |
| Power | |
|
Input power |
AC 100~240V/AC, 50-60Hz |
|
PoE Output Power |
120Watts max for -40 to 60oC / Power derating 12W/ oC for 60 to 70oC |
|
Power Consumption (Type.) |
22Watts (power device not included) |
|
Overload current protection |
Present |
| Physical Characteristic | |
|
Enclosure |
19 inches rack mountable |
|
Dimension (W x D x H) |
443.7(W) x 230(D) x 44(H) mm |
|
Weight (g) |
3,554 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Warranty | 5 years |
|
Available Model |
| Model No. | Description |
| RGPS-7084GP-P_US | Industrial 12-port rack mount managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and 4x1000Base-X, SFP socket, power supply included, US power cord |
| RGPS-7084GP-P_EU | Industrial 12-port rack mount managed Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E. and 4x1000Base-X, SFP socket, power supply included, EU power cord |
|
Accessories |
| Model No. | Description |
| Open-Vision M500 | Powerful Network Management Windows Utility Suite, 500 IP devices |
