The INJ-102GT PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection, providing 2-ports of 10/100/1000Base-T(X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This mechanism protects against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this Intelligent Detection, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT PoE Injector. Typically in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters – due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer does not need to worry about voltage drops caused by cable length. The INJ-102GT PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.

Note : The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).

•Supports 2x10/100/1000Base-T(X) for power and data Output
•Fully compliant with IEEE 802.3at/802.3af
•Auto protection for Over Voltage Power Input and over current output
•Supports Power Output up to 30Watts at 50VDC input
•IP-30 Rugged Case Design
•DIN-Rail and Wall Mount Design