IES-3162GC is managed Redundant Ring Ethernet switch with 16x10/100TX ports & 2x1000 combo ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. All function of IES-3162GC can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40 to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
Features
•
World’s fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection)
•
Open-Ring support the other vendor’s ring technology in open architecture
•
O-RSTP support applications with complex topology
•
STP/RSTP/MSTP supported
•
IGMP snooping for filtering multicast traffic
•
Port Trunking for easy of bandwidth management
•
SNMP v1/v2c/v3 support for secured network management
•
RMON for traffic monitoring
•
Event notification through Syslog, Email, SNMP trap, and Relay Output
•
Port lock to prevent access from unauthorized MAC address
•
Windows utility (Open-Vision) support centralized management and configurable by Web-based ,Telnet, Console, CLI
•
Dual redundant DC power inputs of terminal block
•
Support two Gigabit combo port
•
Very wide operating temperature range from -40 to 70°C
•
Rigid IP-30 housing design
•
DIN-Rail and panel mounting enabled
Product Features
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
with P.S.E
16
1000 combo in RJ-45 and SFP
2
Technology
Ethernet Standards
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table
8192 MAC addresses
Priority Queues
4
Processing
Store-and-Forward
Switch Properties
Switching latency : 7 us
Switching bandwidth : 7.2Gbps
Max. Number of Available VLANs : 4096
IGMP multicast groups : 1024
Port rate limiting : User Define
Security Feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast filtering
Port configuration, status, statistics, monitoring, security
Network Redundancy
O-Ring
Open-Ring
O-RSTP
STP
RSTP
MSTP
RS-232 Serial Console Port
RS-232 in RJ45 connector with console cable. 9600bps, 8, N, 1
LED Indicators
Power Indicator
Green : Power LED x 3
R.M. Indicator
Green : indicate system operated in O-Ring master mode
Fault Indicator
Amber : Indicate excepted event occurred
10/100TX RJ45 Port Indicator
Green for port Link/Act. Amber for Duplex/Collision
10/100/1000T(X) RJ45 port indicator
Green for port Link/Act. Amber for 100Mbps indicator
1000X / Fiber port indicator
Green for port Link/Act.
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Dual DC inputs. 12 - 48VDC on 6-pin terminal block
Power Consumption (Typ.)
12 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
74.3(W) x 109.2(D) x 153.6(H) mm (2.93x4.3x6.05 inch)
Introduction 
