Login | Register│ SiteMap │ Contact us | Language English

简体中文
Product Content
About Us News Products Technologies Applocations ODM Support Where to buy
 
 
   
   
Industrial Rack Mount Ethernet Switch
Rack-Mount Ethernet Switch
   
Industrial IP67 Ethernet Switch
Lite-managed IP67 Switches
   
   
   
   
   
Industrial USB Server
USB Server
Wireless USB Server
   
   
   
 
 
 
 
 
 
Home >> Products >>   >>   >> IAP-320/320+ 
IAP-320/320+
Industrial 802.11 a/b/g Redundant Access Point
 
 
Send an inquiry
 
 
Downloads
 
High resolution photo

 
 
Introduction 
 
Specifications 
 
Ordering Information 
 
Accessories 

 Overview
     

     IAP-320 series are reliable IEEE802.11 a/b/g WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-320 series by WEB interface via LAN port or WLAN interface.IAP-320 series provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IAP-320 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-320 series are one of the best communication solutions for wireless applications on the industrial network.

 Features
• High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
• Support X-Roaming < 100 ms
• Support wireless load balance
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
• Support AP/Bridge/Repeater/AP-Client Mode
• Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
• Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
• Rigid IP-30 housing design
• DIN-Rail and panel mounting enabled



 Product Features
     

  IAP-320 IAP-320+
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 2
PoE. PD port  - Present at ETH2
  Fully compliant with IEEE 802.3af   Power
  Device specifi cation
  Over load & short circuit protection
  Isolation Voltage : 1000 VDC min.
  Isolation Resistance : 108 ohms min

 
 WLAN interface
Operating Mode AP/Bridge/Repeater/AP-Client
Antenna and connector 2dBi ( b/g mode) / 3dBi ( a mode ) antenna on reverse SMA connector
Radio Frequency Type DSSS
Modulation IEEE802.11a : OFDM with BPSK, QPSK, 16QAM, 64QAM
IEEE802.11b : CCK, DQPSK, DBPSK
IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band
America / FCC : 2.412~2.462 GHz (11 channels)
5.15 to 5.825 GHz (13 channels)
Europe CE / ETSI : 2.412~2.472 Ghz (13 channels)
5.15 to 5.724 GHz (19 channels)
Transmission Rate IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps
IEEE802.11a/g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps
Transmit Power IEEE802.11a/b/g : 20dBm max
Receiver Sensitivity -81dBm @ 11Mbps, PER< 8%;
-64dBm @ 54Mbps, PER< 10%
Encryption Security WEP : (64-bit ,128-bit key supported)
WPA :
WPA2 : 802.11i(WEP and AES encryption)
PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security SSID broadcast disable

 
 Protocol Support
Protocol ARP, BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)

 
 LED Indicators
Power Indicator PWR 1(2)(P.O.E.) / Ready :
  Red On : Power is on and booting up.
  Green On : Power is on and functioning Normally.
10/100TX RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps
WLAN LEDs WLAN Link /ACT : Green : Link, Orange : Poor signal
WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100%
Fault Red : Ethernet link down or power down

 
 Fault contact
Relay Relay output to carry capacity of 1A at 24VDC

 
 Power
Redundant Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 6 Watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block

 
 Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
 
Weight (g) 800 g 804 g

 
 Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 55°C (14 to 131°F)
Operating Humidity 5% to 95% Non-condensing

 
 Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years
 


 Available Model
IAP-320_EU Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), EU band
IAP-320_JP Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), JP band
IAP-320+_US Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., US band
IAP-320+_EU Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., EU band
IAP-320+_JP Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), 1-port PoE P.D., JP band
IAP-320_US Industrial IEEE 802.11 a/b/g wireless access point with 2x10/100Base-T(X), US band

 Accessories
DR-45 series 45W DIN-Rail power supply
DR-75 series 75W DIN-Rail power supply
DR-120 series 120W DIN-Rail power supply
WLAN RF Antenna WLAN RF Antenna
RF Antenna Base RF Antenna Base
RF Surge Protector RF Surge Protector
RF Cable RF Cable

 
 
 
 
 
Home │ About Us │ News & Events │ Products │ Technologies │ Applications │ Success Stories │ Support │ Where to buy │ Contact Us
ORing © 2010 Taiwan Inc. All Rights Reserved.