IAP-120 series are reliable IEEE802.11b/g WLAN Access Point with 2 ports LAN. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-120 series by WEB interface via LAN port or WLAN interface. IAP-120 series provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IAP-120 series also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-120 series are one of the best communication solutions for wireless applications on the industrial network.
Features
•
High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed
Switch Mode Supported: Daisy Chain support to reduce usage of switch ports
•
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
•
Secured Management by HTTPS
•
Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper
•
Rigid IP-30 housing design
•
DIN-Rail and panel mounting enabled
Product Features
IAP-120
IAP-120+
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
P.O.E. PD port
-
Present at ETH2
Fully compliant with IEEE 802.3af Power
Device specifi cation
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
Introduction 
