IDS-5042 series is an innovative secure 4 port RS232/422/485 to 2 ports LAN secure device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Ethernet modem. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042 series can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5042 series supports RS-232/422/485 and provides dual redundant power inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further, IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the PoE port. With wide operating temperature, -10~60°C, and rugged IP-30 housing design, IDS-5042 series could operate in the harsh industrial environment. Therefore, IDS-5042 series is the best solution to the high demand of secure serial to Ethernet critical data communication.
Features
•
Operating Modes: Virtual Com, Serial Tunnel, TCP Server,TCP Client, UDP
NAT-pass through: user can manage IDS-5042/5042+ through NAT router
•
Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List
•
Internet Communication: PPPoE
•
Update DNS Hostname: DDNS
•
Event Warning by Syslog, Email, SNMP trap, and Beeper
•
Configurable by Web-based and Windows utility (DS-Tool)
•
Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA (32bit/64bit) /Windows 7(32bit/64bit)
•
1KV isolation for PoE P.D. port of IDS-5042+
Product Features
IDS-5042
IDS-5042+
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
PoE Feature
PoE.Present at ETH2
Power Device (IEEE 802.3af ) :
IEEE 802.3af compliant input interface
Power consumption : 8Watts max.
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : ohms min
Serial Ports
Connector
DB9 x 4
Operation Mode
RS232 / RS422 / 4(2)-Wire RS485. Which can be confi gured by DS-Tool
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power Indicator
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input power
Dual DC inputs. 12-48VDC on 6-pin terminal block
Triple DC inputs, 48VDC from PoE and
Dual DC inputs. 12~48VDC on 6-pin terminal block
Power Consumption (Typ.)
5.5 Watts
Overload Current Protection
Present
Reverse polarity protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Introduction 
ohms min
