IES-1160 is unmanaged Ethernet switch with 16x10/100Base-T(X) port. IES-1160 support redundant power inputs, relay output alarm, and surge protection.The wide operating temperature range from -40°C to 70°C can satisfy most of operating environments. Especially, IES-1160 features dual different redundant DC power inputs, two DC power inputs are on terminal block to avoid any unexpected fails on power on. Thus, IES-1160 could guarantee a non-stop operation.Therefore, the switch is one of the most reliable choice for highly-unmanaged Ethernet application.
Features
•
RJ-45 port support Auto MDI/MDI-X switching function
•
Provides Store-and-Forward switching architecture
•
Provides 3.2Gbps Back-plane (Switching Fabric)
•
Warning system by relay output
•
Rigid IP-30 housing design
•
DIN-Rail and wall mounting enabled
Product Features
Physical Ports
ORing Switch Model
IES-1160
10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX
16
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X)
IEEE 802.3x for Flow control
MAC Table
8192 MAC addresses
Priority Queues
4
Processing
Store-and-Forward
Switch Properties
Switching latency: 9 us
Switching bandwidth: 3.2Gbps
LED Indicators
Power Indicator
Green : Power LED x 3
Fault Indicator
Amber : Indicate power failed warning
10/100Base-T(X) RJ45 Port Indicator
Green for port Link/Act. Amber for Duplex/Collision
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Dual DC inputs. 12 ~ 48VDC on 6-pin terminal block
Power Consumption (Typ.)
9 Watts Max.
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
74.3(W)x109.2(D)x153.6(H) mm (2.93 x 4.3 x 6.05 inch)
Introduction 
