IDS-5042-I+ is an innovative secure 4 port RS-422/485 to 2 ports LAN secure device server with isolation featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP, Ethernet modem. In addition, the Windows untility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042-I+ can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5042-I+ supports RS-422/485 and provides dual redundant power inputs, 12~48 VDC, on terminal block to guarantee a non-stop operation. RS-422/485 serial ports are with 2KV isolation. Further, IDS-5042-I+ features PoE P.D. (Power Device) function, compliant with IEEE802.3af standard, with 1kv isolation on the PoE port. With wide operating temperature, -10~60°C, and rugged IP-30 housing design, IDS-5042-I+ could operate in the harsh industrial environment. Therefore, IDS-5042-I+ is the best solution to the high demand of secure serial to Ethernet critical data communication.
5 host devices : Virtual COM, TCP Server, TCP Client mode 4 IP ranges : UDP NAT-pass through
•
user can manage IDS-5042-I+ through NAT router
•
Security : SSL data encryption; secured management by HTTPS and SSH IP Access : IP White List
•
Internet Communication : PPPoE authentication
•
Update DNS Hostname : DDNS
•
Event Warning by Syslog, Email, SNMP trap, Relay and Beeper
•
Configurable by Web-based and Windows utility (DS-Tool)
•
Various Windows O.S. supported :Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows7(32/64bit)
•
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
•
Ethernet switch mode enable Daisy Chain
•
2KV isolation for RS422/485 serial ports
•
1KV isolation for PoE P.D. port
Product Features
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
PoE Feature
PoE.Present at ETH2
Power Device (IEEE 802.3af ) :
IEEE 802.3af compliant input interface
Power consumption : 8Watts max.
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : ohms min
Serial Ports
Connector
5 pin terminal block x 4
Operation Mode
RS422 / 4(2)-Wire RS485. Which can be confi gured by DS-Tool
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Isolating
2KV
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power Indicator
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs
Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input power
Dual DC inputs. 12-48VDC on 6-pin terminal block and power jack
Power Consumption (Typ.)
5.5 Watts
Overload Current Protection
Present
Reverse polarity protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Introduction 
ohms min
