|
|
|
|
 |
Overview |
|
IDS-5042-I+ is an innovative secure 4-port RS-422/485 to 2 ports LAN secure device server with isolation featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DSTool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042-I+ can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS- 5042-I+ features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. |
|
Features |
|
•Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP |
| ORing Media Converter Model | IDS-5042-I+ |
| Physical Ports | |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 |
| PoE P.D. port | PoE Present at ETH2 Power Device (IEEE 802.3af) : IEEE 802.3af compliant input interface Over load and short circuit protection Isolation Voltage : 1000 VDC min. Isolation Resistance : 108 ohms min |
| Serial Ports | |
| Connector | 5-pin terminal block x 4 |
| Operation Mode | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
| Serial Baud Rate | 110 bps to 460.8 Kbps |
| Data Bits | 5, 6, 7, 8 |
| Parity | odd, even, none, mark, space |
| Stop Bits | 1, 1.5, 2 |
| RS-422 | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND |
| RS-485 (2-wire) | Data+, Data-,GND |
| Isolating | 2KV |
| Flow Control | XON/XOFF |
| Network Features | |
| Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS |
| LED Indicators | |
| Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up. Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly. Green On : Power is on and functioning Normally. Green Blinking : Located by Administrator. |
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
| Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Power | |
| Redundant Input Power | Triple DC Inputs,48VDC from PoE and Dual DC inputs. 12~48VDC on 6-pin terminal block |
| Power Consumption (Typ.) | 5.5 watts |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.) |
| Weight (g) | 667g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -10 to 70°C (14 to 158°F) |
| Operating Humidity | 5% to 95% Non-condensin |
| Regulatory Approvals | |
| EMI | FCC Part 15, CISPR (EN55022) class A, |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Warranty | 5 years |
|
Available Model |
| Model No. | Description |
| IDS-5042-I+ | Industrial 4-port secure serial to Ethernet device server with 4xRS-422/485 (2KV isolation) and 2x10/100Base-T(X), 1-port PoE P.D. |
|
Accessories |
| Model No. | Description |
| DR-45 series | 45W DIN-Rail power supply series |
| DR-75 series | 75W DIN-Rail power supply series |
| DR-120 series | 120W DIN-Rail power supply series |
