IDS-5042-WG is an innovative 4 ports RS232/422/485 to 802.11b/g WLAN and 2 ports LAN device server and IDS-5042-IWG with 4 ports isolated RS422/485. Users are able to confi gure the Switch by DS-Tool via LAN port or WLAN interface, but not simultaneously. Once LAN port is activated, WLAN interface will enter standby mode to minimize power consumption. IDS-5042-WG /IDS-5042-IWG offers many powerful features for HW & SW redundant functions. When the connection between master-link and LAN fails, IDS-5042-WG/IDS-5042-IWG can automatically switch to another LAN port within 10mS, and still guarantees a non-stop connection. IDS-5042-WG/IDS-5042-IWG also supports switch mode; users can use Daisy Chain to reduce the usage of Ethernet switch ports. Secondly, IDS- 5042-WG/IDS-5042-IWG can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PCs to avoid Ethernet break or host PCs failure. Thirdly, IDS-5042-WG /IDS-5042-IWG provides dual redundant power inputs on terminal block. IDS-5042-WG /IDS-5042-IWG also provides NAT pass through function so that users are able to manage IDS-5042-WG /IDS-5042-IWG inside or outside the NAT router. It is easy for different IP domain users to use IDS-5042-WG/IDS-5042-IWG. Therefore, IDS-5042-WG/IDS-5042-IWG is one of the best communication solution for wireless application of quad-port serial devices.
Features
•
Dual redundant Ethernet port support redundant mode (Recovery time < 10ms)
•
Ethernet switch mode enable Daisy Chain
•
High Speed with a maximum link speed of 54Mbps With IEEE802.11b/g dual mode capability
•
High Security Capability with WEP, WPA, WPA2, and TKIP
•
Redundant 5 multiple host devices supported to protect your industrial network
•
Versatile modes & event alarm by e-mail
•
HTTPs & SSH protocol supported for secured management
•
NAT router pass through
•
IP table to prevent access from unauthorized IP address
•
Confi gurable by Web-based and Windows utility (DS-Tool)
•
2KV isolation for RS422/485 serial port of IDS-5042-IWG
RS232 / RS422 / 4(2)-Wire RS485. Which can be
confi gured by DS-Tool
RS422 / 4(2)-Wire RS485. Which can be
confi gured by DS-Tool
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1, 1.5, 2
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4-wire)
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2-wire)
Data+, Data-,GND
Flow Control
XON/XOFF, RTS/CTS, DTR/DSR
LED Indicators
Power Indicator
PWR 1(2) / Ready :
Red On : Power is on and booting up.
Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP server did not respond properly.
Green On : Power is on and functioning Normally.
Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator
Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps
WLAN indicator
WLAN Link /ACT : Green : Link
WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100%
Serial TX / RX LEDs
Red : Serial port is receiving data
Green : Serial port is transmitting data
Power
Redundant Input Power
Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.)
6.5 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Introduction 
