|
|
|
|
 |
Overview |
|
IDS-5042-WG is an innovative secure 4-port RS232/422/485 (IDS-5042-IWG is with 4-port RS-422/485 on 5-pin terminal block) to 802.11b/g WLAN, up to 54Mbps, and 2 port LAN device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042-WG and IDS-5042-IWG can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042-WG and IDS-5042-IWG feature HTTPS, SSH, SSL encryption, and 802.1X to assure the security of critical data transmission. |
|
Features |
|
•High Speed Air Connectivity: WLAN interface support up to 54Mbps link speed |
| Specifications |
||
| ORing Media Converter Model | IDS-5042-WG | IDS-5042-IWG |
| Physical Ports | ||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 2 | |
| WLAN Feature | ||
| Operating Mode | Client mode | |
| Antenna and Connector | 2dBi antenna on reversed SMA connector | |
| Radio Frequency Type | DSSS, OFDM | |
| Modulation | IEEE802.11b : CCK, DQPSK, DBPSK IEEE802.11g : OFDM with BPSK, QPSK, 16QAM, 64QAM |
|
| Frequency Band | America/FCC : 2.412~2.462 GHz (11 channels) Europe CE/ETSI : 2.412~2.472 GHz (13 channels) |
|
| Transmission Rate | IEEE802.11b : 1/ 2/ 5.5/ 11 Mbps IEEE802.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54 Mbps |
|
| Transmit Power | IEEE802.11b/g : 18dBm | |
| Receiver Sensitivity | -81dBm @ 11Mbps, PER< 8%; -64dBm @ 54Mbps, PER< 10% |
|
| Encryption Security | WEP : (64-bit ,128-bit key supported) WPA /WPA2 : IEEE802.11i(WEP and AES encryption) WPA-PSK (256-bit key pre-shared key supported) TKIP encryption 802.1x Authentication supported |
|
| Serial Ports | ||
| Connector | DB9(male) x 4 | 5-pin terminal block x 4 |
| Operation Mode | RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool | RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool |
| Serial Baud Rate | 110 bps to 460.8 Kbps | |
| Data Bits | 5, 6, 7, 8 | |
| Parity | odd, even, none, mark, space | |
| Stop Bits | 1, 1.5, 2 | |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND | - |
| RS-422 | Tx+,Tx-, Rx+, Rx-,GND | |
| RS-485 (4-wire) | Tx+,Tx-, Rx+, Rx-,GND | |
| RS-485 (2-wire) | Data+, Data-,GND | |
| RS-485 (2-wire) | Data+, Data-,GND | |
| Isolation | - | 2 KV |
| Flow Control | XON/XOFF, RTS/CTS, DTR/DSR | XON/XOFF |
| Network Features | ||
| Network Protocols | ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS | |
| LED Indicators | ||
| Power Indicator | PWR 1(2) / Ready : Red On : Power is on and booting up Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly Green On : Power is on and functioning Normally Green Blinking : Located by Administrator |
|
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps. |
|
| WLAN Indicator | WLAN Link /ACT : Green WLAN Strength : 1<25%, 2<50%, 3<75%, 4<100% |
|
| Serial TX / RX LEDs | Red : Serial port is receiving data Green : Serial port is transmitting data |
|
| Power | ||
| Redundant Input Power | Dual 12~48VDC on 6-pin terminal block | |
| Power Consumption (Typ.) | 6.5 watts | 6.5 watts |
| Overload Current Protection | Present | |
| Reverse Polarity Protection | Present | |
| Physical Characteristics | ||
| Enclosure | IP-30 | |
| Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.) | |
| Weight (g) | 691 g | 675 g |
| Environmental | ||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | |
| Operating Temperature | -10 to 70°C (14 to 158°F) | |
| Operating Humidity | 5% to 95% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A, | |
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | |
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| Warranty | 3 years | |
|
Available Model |
| Model No. | Description |
| IDS-5042-IWG | Industrial 4-port secure serial to IEEE 802.11 b/g wireless device server with 4xRS-422/485 (2KV isolation) and 2x10/100Base-T(X) |
| IDS-5042-WG | Industrial 4-port secure serial to IEEE 802.11 b/g wireless device server with 4xRS-232/422/485 and 2x10/100Base-T(X) |
|
Accessories |
| Model No. | Description |
| DR-45 series | 45W DIN-Rail power supply series |
| DR-75 series | 75W DIN-Rail power supply series |
| DR-120 series | 120W DIN-Rail power supply series |
| RF Antenna Base Series | RF Antenna Base Series |
| RF Cable Series | RF Cable Series |
| RF Surge Protector Series | RF Surge Protector Series |
| WLAN RF Antenna Series | WLAN RF Antenna Series |
