IGS-1050A/IGS-1041GPA series are unmanaged Ethernet switches with Supports 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) + 1 x 1000Base-X SFP ports. IGS-1050A/IGS-1041GPA series support redundant power input, rigid IP-30 housing and have DIP switches for enabling or disabling relay output alarm. In addition, the wide operating temperature range from -40 to 70 °C can satisfy most of operating environment.
Features
•
Dual redundant DC power inputs at terminal block
•
Supports 5 x 10/100/1000Base-T(X) ports or 4 x 10/100/1000Base-T(X) + 1 x 1000Base-X SFP ports
•
Very wide operating temperature range from -40 to 70°C
•
Rigid IP-30 slim type housing design
•
DIN-Rail and panel mounting enabled
•
Relay output to carry capacity of 1A at 24 VCD
Product Features
IGS-1050A
IGS-1041GPA
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
5
4
1000Base-X SFP ports
1
Technology
Ethernet Standards
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
MAC Table
1024 MAC addresses
Processing
Store-and-Forward
LED Indicators
Power Indicator
Green : Power LED x 2
Fault Indicator
Amber : Indicate PWR1 or PWR2 failure
10/100/1000TX RJ45 port Indicator
Green on only : 1000Mbit
Green and Amber on : 10
1000X SFP port Indicator
Green for port Link/Act
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Dual DC inputs. 12-48VDC on 6-pin terminal block.
Power Consumption (Typ.)
5.5 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
26.1(W) x 94.9(D) x 144.3(H) mm ( 1.03x3.74x5.68 inch.)
Introduction 
