|
|
|
|
 |
Overview |
|
IPS-2042TX/2042FX series are lite-managed redundant ring Ethernet switches with 4x10/100Base-T(X) ports with PoE P.S.E. function and 2x10/100Base- T(X) or 2x100Base-FX fiber ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switches has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application. |
|
Features |
|
•IPS-2042TX provides 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) ports |
| Specifications |
|||
| ORing Switch Model | IPS-2042TX | IPS-2042FX-MM-SC | IPS-2042FX-SS-SC |
| Physical Ports | |||
| Physical Ports | |||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E. | 4 | 4 | 4 |
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E. | 2 | - | - |
| Fiber Ports Number | - | 2 | 2 |
| Fiber Ports Standard | - | 100Base-FX | 100Base-FX |
| Fiber Mode | - | Multi-mode | Single-mode |
| Fiber Diameter (μm) | - | 62.5/125 μm 50/125 μm |
9/125 μm |
| Fiber Optical Connector | - | SC | SC |
| Fiber Ports Specifications Typical Distance (km) | - | 2 km | 30 km |
| Wavelength (nm) | - | 1310 nm | 1310 nm |
| Max. Output Optical Power (dBm) | - | -14 dBm | -8 dBm |
| Min. Output Optical Power (dBm) | - | -23.5 dBm | -15 dBm |
| Max. Input Optical Power(Saturation) | - | 0 dBm | 0 dBm |
| Min. Input Optical Power (Sensitivity) | - | -31 dBm | -34 dBm |
| Link Budget (dB) | - | 7.5 dB | 19 dB |
| Technology | |||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow control IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.) |
||
| MAC Table | 2048 MAC addresses | ||
| Processing | Store-and-Forward | ||
| Switch Properties | Switching bandwidth : 1.2Gbps VLAN : Port Based |
||
| Security Features | Enable/disable ports VLAN to segregate and secure network traffic |
||
| Software Features | STP/RSTP (IEEE 802.1D/w) Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units Open-Ring support the other vendor’s ring technology in open architecture Port configuration, status, statistics, monitoring, security DHCP Client |
||
| Network Redundancy | O-Ring Open-Ring O-Chain Fast recovery STP RSTP |
||
| LED Indicators | |||
| Power /PoE Indicator | Green : Power LED x 3, Green : PoE LED x 4 | ||
| R.M. Indicator | Green : Indicates that the system is operating in O-Ring Master mode | ||
| Fault Indicator | Amber : Indicates unexpected event occurred | ||
| O-Ring Indicator | Green : Indicates that the system is operating in O-Ring mode | ||
| 10/100Base-T(X) RJ45 Port Indicator | Green for port Link/Act. Amber for Link | ||
| Fiber Port Indicator | Green for port Link/Act. Amber for Link | ||
| Power | |||
| Redundant Input Power | Triple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack | ||
| Power Consumption (Typ.) | 5 Watts | 7 Watts | 7 Watts |
| Overload Current Protection | Present | ||
| Reverse Polarity Protection | Present on terminal block | ||
| Physical Characteristics | |||
| Enclosure | IP-30 | ||
| Dimensions (W x D x H) | 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.) | ||
| Weight (g) | 696 g | 709 g | 709 g |
| Environmental | |||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
| Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
| Operating Humidity | 5% to 95% Non-condensing | ||
| Regulatory Approvals | |||
| EMI | FCC Part 15, CISPR (EN55022) class A | ||
| EMS | EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 | ||
| Shock | IEC60068-2-27 | ||
| Free Fall | IEC60068-2-32 | ||
| Vibration | IEC60068-2-6 | ||
| Safety | EN60950-1, | ||
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 304,333 | 269,978 | 270,625 |
| Warranty | 5 years | ||
|
Available Model |
| Model No. | Description |
| IPS-2042TX | Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) |
|
Accessories |
| Model No. | Deacription |
| Open-Vision M500 | Powerful Network Management Windows Utility Suite, 500 IP devices |
| SFP1G series | 1Gbps SFP optical transceiver |
| DR-45 series | 45W DIN-Rail power supply series |
| PAA-121000 | 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, US plug |
| PAE-121000 | 12VDC/1000mA 12W Power Adapter with universal 100 to 240VAC input, EU plug |
