IPS-2042TX/2042FX series are lite-managed Redundant Ring Ethernet switches with 4x10/100TX ports with PoE PSE function and 2x10/100TX or 2x100Base-FX ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switch has 4X10/100TX PSE (Power Sourcing Equipment) ports. PSE is a device (switch or hub for instance) that will provide power in a PoE setup. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection) and RSTP/STP (IEEE 802.1w/D) can protect your missioncritical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS- 2042TX/2042FX can be managed centralized and convenient by a powerful windows utility — Open-Vision. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.
Features
•
World’s fastest Redundant Ethernet Ring : O-Ring (Recovery time < 10ms over 250 units of connection)
IEEE 802.3 for 10Base-T,
IEEE 802.3u for 100Base-T(X) and 100Base-FX,
IEEE 802.3x for Flow control
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE802.1AB for LLDP (Link Layer Discovery Protocol)
IEEE 802.3af PoE specifi cation (up to 25 Watts per port for PSE)
MAC Table
8192 MAC addresses
Processing
Store-and-Forward
Switch Properties
Switching bandwidth : 1.0Gbps
VLAN: Port Based
Security Features
Enable/disable ports
VLAN to segregate and secure network traffic
Software Features
STP/RSTP (IEEE 802.1D/w)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
Port confi guration, status, statistics, monitoring, security
Network Redundancy
O-Ring
STP
RSTP
LED Indicators
Power Indicator
Green : Power LED x 3
R.M. Indicator
Green : Flashing to indicate system operated in O-Ring Master mode
O-Ring Indicator
Green : Indicate system operated in O-Ring mode
Fault Indicator
Amber : Indicate excepted event occurred
10/100TX RJ45 Port Indicator
Green for port Link/Act. Amber for Duplex/Collision
Fiber Port Indicator
Green for port Link/Act. Amber for Link
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Triple DC inputs. 48VDC on 7-pin terminal block and power jack
Power Consumption (Typ.)
7 Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Introduction 
